Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
Evaporative Emission Control Canister: Testing and Inspection
INSPECTION PROCEDURE
1. REMOVE CHARCOAL CANISTER.
2. VISUALLY INSPECT CHARCOAL CANISTER.
-
Look for cracks or damage.
3. CHECK FOR CLOGGED FILTER AND STUCK CHECK VALVE.
-
Blow low pressure compressed air (4.71 kPa, 0.68 psi) into port A and check that air flows without resistance from the other ports.
-
Blow low pressure compressed air (4.71 kPa, 0.68 psi) into port B and check that air does NOT flow from the other ports.
-
If a problem is found, replace the charcoal canister.
4. CLEAN FILTER IN CANISTER.
-
Clean the filter by blowing 294 kPa (43 psi) of compressed air into port A while holding port B closed.
CAUTION:
-
Do not attempt to wash the canister.
-
No activated carbon should come out.