Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
Lamp Control Module: Testing and Inspection
Auto Turn-Off System
IGNITION SWITCH INSPECTION
INSPECT IGNITION SWITCH CONTINUITY
Inspect the switch continuity between terminals. If continuity is not as specified, replace the switch.
INTEGRATION RELAY INSPECTION
INSPECT INTEGRATION RELAY
Relay Circuit/Light Auto Turn Off System
Remove the relay from junction block and inspect the connectors on the
wire harness and junction block side. as shown in the chart.
If the circuit is as specified, try replacing the relay with a new one.