Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
/Page-1823002.png)
NOTICE: Take care not to damage the wire when stripping the wire harness lead. After finishing the operation, visually inspect the wire. If there
is any damage, do the operation again.
(b) Overlap the 2 stripped wire ends inside of the pressure-contact sleeve as illustrated in the left.
HINT: The blue pressure-contact sleeve (Part No. 82999-12020) is available individually.
HINT: You might find it easier if you use a miniature screwdriver as a guide as you insert wires into the sleeve.
(c) The crimping tool (AMP Part No.69060) has color marks on it. Place the sleeve in the correct section of the tool according to the color of the
sleeve itself.
(d) With the center of the sleeve correctly placed between the crimping jaws, squeeze the crimping tool until either end comes into contact at the
