Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
/Page-114002.png)
When the ignition sw is turned on and the brake pedal is pressed (stop light sw on). if the stop light circuit is open. the current flowing from
terminals 7 of the light failure sensor to terminals 1,2 changes. so the light failure sensor detects the disconnection and the warning circuit of the
light failure sensor is activated. as a result. the current flows from terminal 4 of the light failure sensor terminal 11 ground and turns the rear light
warning light on. by pressing the brake pedal. the current flowing to terminal 8 of the light failure sensor keeps the warning circuit on hold and the
warning light on until the ignition sw is turned off.
