Camry Sedan 4-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
/Page-1446001.png)
Clutch Pedal Assembly: Adjustments
1.
Measure clutch pedal height as shown, Fig. .
Fig. 1 Clutch Pedal Height
2.
On 1993 models with 3VZ-FE engine, clutch pedal height should be 6.48-6.88 inches.
3.
On 1993 models with 5S-FE engine and all 1994-96 models, clutch pedal height should be 6.33-6.72 inches.
4.
On models with coded audio anti-theft systems, if clutch pedal height is not as specified, remove lower instrument panel finish panel and air
duct.
5.
Loosen clutch pedal locknut, then rotate stopper bolt until specified height is achieved.
6.
Tighten locknut.
7.
Check clutch pedal freeplay by depressing clutch pedal until resistance is felt. Freeplay should be .197-.591 inch. Pushrod play at top of pedal
should be .039-.197 inch.
8.
If necessary to adjust freeplay, loosen locknut and rotate pushrod until freeplay is as specified.
9.
Tighten locknut.
10.
Ensure clutch pedal height and freeplay are as specified, then reinstall air duct and finish panel.
