Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
/Page-428002.png)
(b) Bleed the hydraulic cooling system.
(c) Keep the engine speed at 2,000 rpm until the fluid temperature reaches the specified temperature.
Fluid temperature: 70 - 90°C (158 - 195°F)
(d) Check the fluid level is correct.
(e) Measure the oil pressure at idling.
Oil pressure: 981 - 1,961 kPa (10 - 20 kgf/cm2, 142 - 284 psi)
(f) Remove the SST from the data link connector 1. SSTO9B43-18020
(g) Check that the oil pressure decreases.
