Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
c. Check that timing marks of the camshaft timing pulleys and No.3 timing belt cover are aligned.
If not, turn the crankshaft 1 revolution (360°).
d. Remove the crankshaft pulley bolt.
18. IF REUSING TIMING BELT, CHECK INSTALLATION MARKS ON TIMING BELT
Check that there are 3 installation marks and front mark on the timing belt.
If the installation and front marks have disappeared. before removing the timing belt. place new installation and front marks on the timing belt to
the following position:
*
Timing mark of RH camshaft timing pulley
*
Timing mark of LH camshaft timing pulley
*
Dot mark of crankshaft timing pulley
19. REMOVE TIMING BELT TENSIONER
Alternately loosen the 2 bolts. and remove them. the tensioner and dust boot.