Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
/Page-384007.png)
If the gasket does have cracks or peeling. etc., replace it using following steps.
(1) Using a screwdriver and gasket scraper. remove all the old gasket material.
(2) Thoroughly clean all components to remove all the loose material.
(3) Remove the backing paper from a new gasket and install the gasket evenly to the part of the belt cover shaded black in the illustration.
(4) After installing the gasket, press down on it so that the adhesive firmly sticks to the belt cover.
b. Install new gasket to the No.2 belt cover.
c. Install the belt cover with the 5 bolts.
Torque: 8.5 N.m (85 kgf.cm, 74 in.lbf)
14. CONNECT ENGINE WIRE
a. Connect the engine wire with the clamp.
b. Install the bolt holding the engine wire to the No.3 timing belt cover.
15. INSTALL NO.1 TIMING BELT COVER
a. Check that the timing belt cover gaskets have cracks or peeling, etc.
If the gasket does have cracks or peeling, etc., replace it using following steps.peeling, etc., replace them using following steps.
(1) Using a screwdriver and gasket scraper, remove all the old gasket material.
(2) Thoroughly clean all components to remove all the loose material.
