Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
(3) Remove the backing paper from a new gasket and install the gasket evenly to the part of the belt cover shaded back in the illustration.
NOTICE: When joining 2 gaskets, do not leave a gap between them. Cut off any excess gasket.
(4) After installing the gasket, press down on it so that the adhesive firmly sticks to the belt cover.
b. Install new gaskets to the No.1 belt cover.
c. Install the belt cover with the 4 bolts.
Torque: 8.5 N.m (85 kgf.cm, 14 in.lbf)
16. INSTALL CRANKSHAFT PULLEY
a. Align the pulley set key with the key groove of the pulley, and slide the pulley.
b. Using SST, install and torque the bolt.
SST: 09213-54015.09330-00021
Torque: 215 N.m (2.200 kgf.cm, 159 ft.lbf)
17. INSTALL NO. 2 GENERATOR BRACKET
Install the bracket with the pivot bolt and nut. Do not tighten the bolt yet.
Torque: 28 N.m (290 kgf.cm, 21 ft.lbf) for Nut