Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
/Page-384009.png)
18. INSTALL NO.2 RH ENGINE MOUNTING BRACKET AND ENGINE MOVING CONTROL ROD
Install the mounting bracket and control rod with the 3 bolts.
Torque: 63.7 N.m (650 kgf.cm. 47 ft.lbf)
19. INSTALL RH ENGINE MOUNTING STAY
Install the mounting stay with the 3 bolts.
Torque: 31.4 N.m (320 kgf.cm. 23 ft.lbf)
20. CONNECT GROUND STRAPS
Connect the 2 straps.
21. INSTALL AND ADJUST P/S DRIVE BELT
Install the drive belt with the pivot and adjusting bolts.
Drive Belt Tension:
New Belt...150 - 185 lbf
Used Belt...115 +/- 20 lbf
