Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
3. Connect engine wire
Connect the engine wire with the 3 clamps.
4. Install No.2 idler pulley
(a) Install the idler pulley with the bolt.
Torque: 43 N.m (440 kgf.cm. 32 ft.lbf)
(b) Check that the idler pulley moves smoothly.
5. Install RH camshaft timing pulley
(a) Install the timing pulley, facing the flange side outward.
(b) Align the knock pin hole of the camshaft with the knock pin groove of the timing pulley as shown.