Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
/Page-840001.png)
EGR Control Solenoid: Service and Repair
PROCEDURE
Removal
1. Disconnect negative (-) terminal cable from battery.
CAUTION: Work must be started after 90 seconds from the time the ignition switch is turned to the LOCK position and the negative (-) terminal
cable is disconnected from the battery.
2. Remove V-bank cover; using a 5 mm hexagon wrench, remove the 2 cap nuts and V-bank cover.
3. Remove emission control valve set.
