Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
/Page-910003.png)
9. Disconnect Hydraulic Motor Pressure Pipe
^
Remove the 2 bolts, and disconnect the pressure pipe from the water inlet and air intake chamber.
10. Remove Air Intake Chamber Assembly.
^
Disconnect the 2 PS air hoses.
^
Remove the bolt holding the air intake chamber stay to the air intake chamber.
Disconnect the following connectors:
^
A/C idle-up valve connector; 1
^
EGR gas temperature sensor connector; 2
^
Throttle position sensor connector; 3
^
IAC valve connector; 4
Disconnect the following vacuum hoses:
^
Vacuum hose from charcoal canister; 1
