Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
/Page-924002.png)
^
Apply a light coat of gasoline to a new 0-ring, and install it to the pressure regulator.
^
Attach the pressure regulator to the delivery pipe.
^
Check that the pressure regulator rotates smoothly.
NOTE: If it does not rotate smoothly, the 0-ring may be pinched. So remove the pressure regulator and repeat steps above to insure proper
placement.
^
Install the pressure regulator with the 2 bolts.
Torque: 8 Nm (69 in lb)
