Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
REMOVAL
1. Remove throttle body.
See: Throttle Body/Service and Repair
2. Remove Idle Air Control Valve. Remove the 4 screws, Idle Air Control Valve and gasket.
INSTALLATION
1. Install Idle Air Control Valve.
^
Place a new gasket on the throttle body.
^
Install the Idle Air Control Valve with the 4 screws.
2. Install throttle body.