Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
Fuel Pump Relay: Testing and Inspection
PROCEDURE
Inspect Relay Continuity.
Testing Relay Continuity
1. Using an ohmmeter. check that there is continuity between terminals ST and E1.
2. Check that there is continuity between terminals +B and FC.
3. Check that there is NO continuity between terminals + B and FP.
If continuity is not as specified. replace the relay.
Inspect Relay Operation
Testing Relay Operation
1. Apply battery voltage across terminals ST and E1.
2. Using an ohmmeter, check that there is continuity between terminals +B and FP.
If operation is not as specified, replace the relay.