Camry Sedan 4-Door V6-3.0L (1MZ-FE) (1994)
10.
INSTALL LOWER VALVE BODY COVER GASKETS AND NO. 2 PLATE
Position the gasket and plate and then the other gasket.
11.
INSTALL LOWER VALVE BODY COVER
(a)
Position the lower valve body cover.
(b)
Install and finger tighten the twelve bolts.
Note:
Each bolt length mm (in.) is indicated in figure 25.
12.
TIGHTEN BOLTS OF UPPER AND LOWER VALVE BODIES
(a)
Tighten the thirteen bolts in the lower valve body. Bolt Torque 6.6 N-m (67 kgf-cm, 58 in.lbf.).