toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Alarm System Transponder|Testing and Inspection|Page 5033 > < Alarm System Transponder|Testing and Inspection|Page 5031
Page 5
background image

2. Using TOYOTA hand-held tester.

4. ERASURE OF TRANSPONDER KEY CODE

There are 2 ways for erasure of transponder key code, one is depressing brake pedal and acceleration pedal and the other is using TOYOTA
hand-held tester.

NOTE:  All other master and sub-key codes are deleted leaving the master key code to use the operation. When using the key which was used
before deleting, it is necessary to register the code again.

HINT:
-

When any operation time described below is over, registration mode completes.

-

When the next procedure is performed while the timer is working, the timer completes counting time, then next timer starts.

Alarm System Transponder|Testing and Inspection|Page 5033 > < Alarm System Transponder|Testing and Inspection|Page 5031