Camry Solara SE L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-1430002.png)
a. Connect the negative (-) lead from the battery to terminal 2.
b. Connect the positive (+) lead from the ammeter to terminal 1 and the negative (-) lead to battery negative (-) terminal, and check that the current
changes from approximately 3.2 A to less than 0.5 A within 20 to 70 seconds.
c. Disconnect the leads from terminals.
d. Approximately 60 seconds later, connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1, and check that
the door lock moves to the LOCK position.
If operation is not as specified, replace the door lock assembly.
Using an ammeter:
INSPECT PASSENGER'S DOOR PTC THERMISTOR OPERATION
a. Connect the negative (-) lead from the battery to terminal 6.
b. Connect the positive (+) lead from the ammeter to terminal 5 and the negative (-) lead to battery negative (-) terminal, and check that the current
changes from approximately 3.2 A to less than 0.5 A within 20 to 70 seconds.
c. Disconnect the leads from terminals.
