Camry Solara SE L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-1011005.png)
4. w/ TRAC: INSTALL 2 PISTONS AND SPRING
a. Install the 2 piston and springs into the cylinder body.
b. Push in the piston with a screwdriver, and install the 2 straight pins to the cylinder body.
HINT:
^
Tape the screwdriver tip before use.
^
Insert the pistons with elliptic hole facing vertically.
NOTICE: Be careful not to damage the rubber lips on the pistons.
5. INSTALL 2 GROMMETS
6. INSTALL RESERVOIR
a. Install the strainer and cap to the reservoir.
b. Install the reservoir and set screw.
Torque: 1.7 N m (18 kgf-cm, 16 inch lbs.)
