Camry Solara SE L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
a. Lightly press SST against the lock plate in the order shown in the illustration. After repeating this a few times, fully caulk the lock plate by
squeezing the handle until stopped by the stopper plate.
SST 09230-01010
HINT:
^
Do not stake the areas protruding around the pipes, brackets or tank ribs.
^
The points shown in the illustration and oil cooler near here (A/T) cannot be staked with the SST. Use pliers or similar object and be
careful not to damage the core plates.
b. Check the lock plate height (H) after completing the caulking.
Plate height: 7.40 - 7.80 mm (0.2913 - 0.3071 inch)
If not within the specified height, adjust the stopper bolt of the handle again and caulk again.