Camry Solara SE L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-1216002.png)
2. REMOVE ROTOR
a. Using SST, remove the snap ring.
SST 07114-84020
NOTE: At the time of reassembly, please refer to the following item.
The snap ring should be installed so that beveled side faces up.
b. Using a plastic hammer, tap the rotor off the shaft.
NOTE: Be careful not to damage the pulley when tapping on the rotor.
3. REMOVE STATOR
a. Disconnect the stator lead wire from the compressor housing.
