toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Removal And Installation|Page 4653 > < Removal And Installation|Page 4651
Page 1
background image

Evaporator Case: Service and Repair
Disassembly and Reassembly

DISASSEMBLY

1. REMOVE EXPANSION VALVE

a. Pry out the packing.
b. Using a hexagon wrench (5.0 mm, 0.20 in.), remove the 2 bolts and expansion valve.

NOTE:  Cap the open fittings immediately to keep moisture or dirt out of the system.

2. REMOVE AIR OUTLET SERVOMOTOR

a. Using a screwdriver, release the claw and remove the plate.

HINT:  Tape the screwdriver tip before use.

b. Disconnect the connector.
c. Remove the 3 screws and servomotor.

3. REMOVE AIR DUCT (for Foot)

Removal And Installation|Page 4653 > < Removal And Installation|Page 4651