toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Drive Belt > < Timing Belt|Specifications|Page 899
Page 15
background image

b. Alternately tighten the 3 bolts in several passes.

Torque: 52 Nm (530 kgf-cm, 38 ft. lbs.) 

16. INSTALL ENGINE MOVING CONTROL ROD

a. Temporarily install the control rod with the 3 bolt.
b. Alternately tighten the 3 bolts in several passes.

Torque: 64 Nm (650 kgf-cm, 47 ft. lbs.) 

17. CONNECT GROUND STRAP CONNECTOR

18. INSTALL PS PUMP DRIVE BELT

Install the drive belt with the 2 bolts.

19. INSTALL RH FRONT FENDER APRON SEAL
20. INSTALL RH FRONT WHEEL
21. INSTALL GENERATOR

Drive Belt > < Timing Belt|Specifications|Page 899