toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Positive Crankcase Ventilation > < EGR Valve|Locations
Page 1
background image

EGR Valve: Service and Repair

INSPECT EGR VALVE

A. Remove the EGR valve.

1. Disconnect the 2 vacuum hoses from the EGR valve.
2. Remove the 2 bolts, 2 nuts, EGR valve and 2 gaskets.

B. Reinstall the EGR valve.

1. Temporarily 2 new gasket and the EGR valve with the 2 nuts and 2 bolts.
2. Tighten the nuts.

Torque: 13.3 N.m (136 kgf.cm, 10 ft.lbf)

3. Tighten the bolts.

Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)

4. Connect the 2 vacuum hoses to the EGR valve.

Positive Crankcase Ventilation > < EGR Valve|Locations