toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

All Other Service Bulletins for Fuel Injector: > < Engine Controls - MIL ON/DTC P0300/Stall/Rough Idle|Page 2612
Page 4
background image

4.

Add one can of Fuel Injector Cleaner P/N 08813-00080 into the fuel tank.

STEP 5:

Replace the negative battery cable and tighten. Start and drive the vehicle at least 30 minutes at 60 miles per hour to facilitate the removal of carbon.
Then restart and drive the vehicle at least one more time to verify proper operation of all components and correction of the M.I.L. "ON" condition.

NOTE:

In the interest of ensuring a satisfying ownership experience for our customers, ensure that they are aware of the following information:

^

This vehicle is designed to run best on name brand regular fuel (87 Octane).

^

Attempting to start the vehicle with the accelerator pedal depressed can lead to some amount of misfire and possibly contribute to causing a
M.I.L. "ON" condition.

All Other Service Bulletins for Fuel Injector: > < Engine Controls - MIL ON/DTC P0300/Stall/Rough Idle|Page 2612