Camry Solara SE L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-761001.png)
Crankshaft Position Sensor: Testing and Inspection
INSPECT CRANKSHAFT POSITION SENSOR
a. Disconnect the crankshaft position sensor connector.
b. Using an ohmmeter, measure the resistance between terminals.
Resistance:
Cold
985 - 1,600 Ohms
Hot
1,265 - 1,890 Ohms
If the resistance is not as specified, replace the sensor.
c. Reconnect the crankshaft position sensor connector.
