toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Side Airbag Connectors|Page 4863 > < Side Airbag Connectors|Page 4861
Page 8
background image

Torque: 37 Nm (375 kg.cm, 27 ft.lb)

Replacement Requirements

REPLACEMENT REQUIREMENTS

In the following cases, replace the seatback assembly or seat cover.

-

If the side airbag has been deployed.

-

If the side airbag assembly has been found to be faulty in troubleshooting.

-

If the side airbag assembly or seatback cover has cuts and frayed seams during checking item. 

-

If the side airbag assembly or seatback cover has been found to be faulty during checking item.

-

If the seatback assembly has been dropped.

CAUTION:  Be sure to follow the correct procedure,for removal and installation on the seatback assembly.

Airbag Deployment When Scrapping Vehicle

HINT:  When scrapping vehicles equipped with an SRS or disposing of the side airbag assembly always first deploy the airbag in accordance with the
procedure described. If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT. of TOYOTA MOTOR SALES, U.S.A., INC.
When disposing of a side airbag assembly with an airbag deployed in a collision, follow the same procedure given in step e.

CAUTION:

-

Never dispose of a side airbag assembly which has an undeployed airbag.

-

The airbag produces a sizeable exploding sound when it deploys, so perform the operation out of doors and where it will not create a nuisance to
nearby residents.

-

When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool), perform the operation in a place away from electrical
noise.
SST 09082-00700

-

When deploying an airbag, perform the operation at least 10 m (33 ft) away from the airbag assembly.

-

The side airbag assembly is very hot when the airbag is deployed, so leave it alone for at least 30 minutes after deployment.

-

Use gloves and safety glasses when handling side airbag assembly with the deployed airbag.

-

Always wash your hands with water after completing the operation.

-

Do not apply water, etc. to a side airbag assembly with the deployed airbag.

HINT: Have a battery ready as the power source to deploy the airbag.

a. Check functioning of the SST. 

SST 09082-00700

Side Airbag Connectors|Page 4863 > < Side Airbag Connectors|Page 4861