Camry Solara SE L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-1316010.png)
e. Dispose of side airbag assembly.
CAUTION:
-
The side airbag assembly is very hot when the airbag is deployed, so leave it alone for at least 30 minutes after deployment.
-
Use gloves and safety glasses when handling a side airbag assembly with the deployed airbag.
-
Do not apply water, etc. to a side airbag assembly with the deployed airbag.
-
Always wash your hands with water after completing the operation.
-
When scrapping a vehicle, deploy the airbag and scrap the vehicle with the side airbag assembly still installed.
Deployment When Disposing of Side Airbag Assembly
HINT: When scrapping vehicles equipped with an SRS or disposing of the side airbag assembly always first deploy the airbag in accordance with the
procedure described. If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT. of TOYOTA MOTOR SALES, U.S.A., INC.
When disposing of a side airbag assembly with an airbag deployed in a collision, follow the same procedure given in step e.
CAUTION:
-
Never dispose of a side airbag assembly which has an undeployed airbag.
-
The airbag produces a sizeable exploding sound when it deploys, so perform the operation out of doors and where it will not create a nuisance to
nearby residents.
-
When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool), perform the operation in a place away from electrical
noise.
SST 09082-00700
-
When deploying an airbag, perform the operation at least 10 m (33 ft) away from the airbag assembly.
-
The side airbag assembly is very hot when the airbag is deployed, so leave it alone for at least 30 minutes after deployment.
-
Use gloves and safety glasses when handling side airbag assembly with the deployed airbag.
-
Always wash your hands with water after completing the operation.
-
Do not apply water, etc. to a side airbag assembly with the deployed airbag.
NOTE:
-
When disposing of the side airbag assembly only, never use the customer's vehicle to deploy the airbag.
-
Be sure to follow the procedure given below when deploying the airbag.
HINT: Have a battery ready as the power source to deploy the airbag.
a. Remove the seatback assembly.
b. Remove the side airbag assembly from the seatback assembly.
CAUTION: Store the side airbag assembly with the airbag deployment side facing upward.
c. Fix the side airbag assembly.
1. Install the 2 nuts to the side airbag assembly.
