Camry Solara SE L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-90002.png)
INSPECT NO.1 ECT SWITCH CONTINUITY
a. Using an ohmmeter, check that there is no continuity between the terminals when the coolant temperature is above 98 °C (208 °F).
If there is continuity, replace the switch.
b. Using an ohmmeter, check that there is continuity between the terminals when the coolant temperature is below 88 °C (190 °F).
If there is no continuity, replace the switch.
6. 1MZ-FE engine:
INSPECT NO.2 ECT SWITCH CONTINUITY
a. Using an ohmmeter, check that there is continuity between terminal and switch body when the coolant temperature is above 93 °C (199 °F).
b. Using an ohmmeter, check that there is no continuity between terminal and switch body when the coolant temperature is below 83 °C (181 °F).
If continuity is not as specified, replace the switch.
7. INSTALL ECT SWITCH
a. Install the new O-ring to the switch.
b. Install the switch.
8. 5S-FE engine only:
INSTALL ENGINE UNDER COVER
9. FILL WITH ENGINE COOLANT
