toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Fog Light Switch <--> [Fog/Driving Lamp Switch] > < Combination Switch|Locations
Page 1
background image

Dome Lamp Switch: Testing and Inspection

INSPECT DOME LAMP SWITCH

a. Disconnect the connector from the dome lamp.
b. Turn the dome lamp switch ON, check that continuity exists between terminal 2 and body ground.

c. Turn the dome lamp switch DOOR, check that there is continuity exists between terminal 1 and 2.

If operation is not as specified, replace the switch.

Fog Light Switch <--> [Fog/Driving Lamp Switch] > < Combination Switch|Locations