Camry Solara SE L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-1060006.png)
9. Using a plastic-faced hammer, tap the clutch shaft and install the stop collar onto the snap ring.
2. REPLACE FRONT BEARING
a. Using SST, remove the bearing.
SST O9286-46O11
b. Using SST and a press, press in a new bearing.
NOTE: Be careful of the bearing installation direction.
SST 09820-00030
3. REPLACE REAR BEARING
a. Using SST' remove the bearing.
SST 09286-46011
