toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Steering Gear|Removal and Installation|Page 4192 > < P/S - Power Steering Rack Squeaking Noise|Page 4189
Page 1
background image

Steering Gear: Service and Repair
Removal and Installation

REMOVAL 

NOTICE:  Remove the steering wheel assembly before the steering gear removal, because there is possibility of breaking of the spiral cable.

1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
2. REMOVE STEERING WHEEL PAD
3. REMOVE STEERING WHEEL
4. DISCONNECT RH AND LH TIE ROD ENDS
5. DISCONNECT INTERMEDIATE SHAFT ASSEMBLY
6. DISCONNECT CLAMP PLATE

Remove the nut and disconnect the pressure feed tube clamp plate.

Steering Gear|Removal and Installation|Page 4192 > < P/S - Power Steering Rack Squeaking Noise|Page 4189