Camry Solara SE L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-881004.png)
Torque: 10 Nm (100 kgf-cm, 7 ft. lbs.)
Bolt length:
Bolt A: 20 mm (0.79 inch)
Bolt B: 25 mm (0.98 inch)
Bolt C: 36 mm (1.42 inch)
Bolt D: 50 mm (1.97 inch)
16. INSTALL OIL PIPE
Using a plastic hammer, install the 4 pipes into the positions indicated in the illustration.
NOTICE: Be careful not to bend or damage the pipes.
17. CONNECT SOLENOID CONNECTOR
Connect the black wire harness to shift solenoid valve No.2 and white wire harness to shift solenoid valve No.1.
18. INSTALL OIL STRAINER AND OIL PIPE BRACKET
a. Install the 2 bolts and oil pipe bracket.
Torque: 10 Nm (100 kgf-cm, 7 ft. lbs.)
b. Install the 3 bolts and oil strainer.
Torque: 10 Nm (100 kgf-cm, 7 ft. lbs.)
19. INSTALL MANUAL VALVE BODY DETENT SPRING AND MANUAL VALVE BODY
