Camry Solara SE L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
c. Disconnect the connector.
d. Push a piano wire through from the interior.
e. Tie both wire ends to wooden blocks or similar objects.
HINT: Apply protective tape to the outer surface to keep the surface from being scratched.
NOTE: When separating the glass, take care not to damage the paint and exterior.
f.
Cut the adhesive by pulling the piano wire around it.
HINT: Cut the adhesive areas as shown in the illustration, leaving the adhesive where the clips are.