Camry Solara SE V6-3.0L (1MZ-FE) (2001)
/Page-1157003.png)
4. DISCONNECT BRAKE LINES
(a) w/ ABS (& TRAC):
Using SST, disconnect the 4 brake lines.
SST 09023-00100
(b) w/o ABS:
Using SST, disconnect the 5 brake lines.
SST 09023-00100
5. REMOVE MASTER CYLINDER
Remove the 2 nuts, and pull out the 2 or 3-way, master cylinder and gasket.
INSTALLATION
1. BEFORE INSTALLATION, ADJUST LENGTH OF BRAKE BOOSTER PUSH ROD
2. INSTALL MASTER CYLINDER
Install the new gasket, master cylinder, 2 or 3-way and 2 nuts.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
3. BLEED MASTER CYLINDER
4. CONNECT BRAKE LINES
Using SST, connect the 4 or 5 brake lines.
SST 09023-00100
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
