Camry Solara SE V6-3.0L (1MZ-FE) (2001)
/Page-385002.png)
b. Apply adhesive to 2 or 3 threads of the oil pressure switch.
Adhesive:
Part No. 08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent
c. Using SST, install the oil pressure switch.
SST 09816-30010
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
7. START ENGINE AND CHECK FOR LEAKS
