Camry Solara SE V6-3.0L (1MZ-FE) (2001)
/Page-586001.png)
Crankshaft Position Sensor: Service and Repair
REMOVAL
1. REMOVE RH FENDER APRON SEAL
2. REMOVE CRANKSHAFT POSITION SENSOR
a. Remove the bolt and disconnect the crankshaft position sensor.
Torque: 8 N.m (80 kgf.cm, 69 in.lbf)
b. Disconnect the crankshaft position sensor connector.
INSTALLATION
Installation is in the reverse order of removal.
