Camry Solara SEV6 V6-3.0L (1MZ-FE) (1999)
Oxygen Sensor: Testing and Inspection
Heated Oxygen Sensor (Bank 1, 2 Sensor 1)
Except California A/T: INSPECT HEATER RESISTANCE OF HEATED OXYGEN SENSORS (Bank 1 Sensor 1, Bank 2 Sensor 1)
a. Disconnect the oxygen sensor connector.
b. Using an ohmmeter, measure the resistance between the terminals +B and HT.
Resistance: 11 - 16 ohms at 20° C (68° F)
If the resistance is not as specified, replace the sensor.
Torque: 44 N.m (440 kgf.cm, 31 ft.lbf)
c. Reconnect the oxygen sensor connector.