Camry Solara SEV6 V6-3.0L (1MZ-FE) (1999)
Voltage Check
(a) Establish conditions in which voltage is present at the check point.
Example:
A - Ignition SW ON
B - Ignition SW and SW 1 ON
C - Ignition SW, SW 1 and Relay ON (SW 2 OFF)
(b) Using a voltmeter, connect the negative lead to a good ground point or negative battery terminal, and the positive lead to the connector or
component terminal. This check can be done with a test light instead of a Voltmeter.