Camry Solara SEV6 V6-3.0L (1MZ-FE) (1999)
g. Remove the generator from SST (C).
h. Turn SST (B), and remove SST (A and B).
4. INSTALL RECTIFIER HOLDER
a. Place the seal plate on the rectifier end frame.
b. Install the 4 rubber insulators on the lead wires.
c. Install the rectifier holder with the 4 screws.
Torque: 2.9 Nm (30 kgf.cm, 26 in.lbf)
5. INSTALL VOLTAGE REGULATOR AND BRUSH HOLDER