Camry Solara SLEV6 V6-3.0L (1MZ-FE) (2000)
/Page-1365002.png)
a. Using a screwdriver, remove and open the screw covers of the rear assist grip.
HINT: Tape the screwdriver tip before use.
b. Remove the 2 screws and rear assist grip.
c. Using a screwdriver, remove the quarter trim panel.
HINT: Tape the screwdriver tip before use.
d. Employ the same manner described above to the other side.
12. REMOVE ROOF SIDE INNER GARNISH
a. Remove the bolt and front seat belt shoulder anchor.
b. Remove a screw and coat hook.
c. Remove a clip.
d. Using a screwdriver, remove the roof side inner garnish.
HINT: Tape the screwdriver tip before use.
e. Employ the same manner described above to the other side.
13. w/ High-mounted stop light:
REMOVE HIGH-MOUNTED STOP LIGHT
a. Push on the both side of the cover to release the claws by your hand and remove the cover as shown in the illustration.
b. Remove stop light, then disconnect the connector.
14. REMOVE PACKAGE TRAY TRIM
