toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Keyless Entry Receiver|Testing and Inspection|Page 4886 > < Headliner|Specifications|Page 4880
Page 1
background image

Keyless Entry Receiver: Testing and Inspection

Wireless Door Lock Control System 

INSPECT WIRELESS DOOR LOCK CONTROL RECEIVER CIRCUIT

a. Disconnect the connector from the receiver and inspect the connector on the wire harness side, as shown.

If the circuit is not as specified, inspect the circuit connected to other parts.

b. Connect the wire harness side connector to the receiver and inspect the wire harness side connector from the back side, as shown.

If circuit is as specified, replace the receiver.
If the circuit is not as specified, inspect the circuit connected to other parts.

Keyless Entry Receiver|Testing and Inspection|Page 4886 > < Headliner|Specifications|Page 4880