Camry Solara SLEV6 V6-3.0L (1MZ-FE) (2000)
a. Install the speed sensor to the steering knuckle.
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
b. Install the resin clip and clamp bolt holding the sensor harness to the body.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
c. Install the speed sensor harness clamp, flexible hose and bolt to the shock absorber.
Torque: 29 Nm (300 kgf-cm, 21 ft. lbs.)
2. INSTALL SPEED SENSOR CONNECTOR
a. Connect the speed sensor connector.
b. Install the fender liner.
3. CHECK SPEED SENSOR SIGNAL