Camry Solara SLEV6 V6-3.0L (1MZ-FE) (2000)
b. Install the pressure plate on the rotor.
c. Using SST and a socket wrench, tighten the shaft bolt.
SST 07112-76060
Torque: 13.2 Nm (135 kg.cm, 9 ft.lb)
4. AFTER REASSEMBLY, CHECK MAGNETIC CLUTCH CLEARANCE
a. Set the dial indicator to the pressure plate of the magnetic clutch.
b. Connect the magnetic clutch lead wire to the positive (+) terminal of the battery.
c. Check the clearance between the pressure plate and rotor when connecting the negative (-) terminal to the battery.
Standard clearance:
0.5 ± 0.15 mm (0.020 ± 0.0059 in.)
If the clearance is not within the standard, adjust the clearance using shims to obtain the standard clearance.
Shim thickness:
0.1 mm (0.004 in.)
0.3 mm (0.012 in.)
0.5 mm (0.020 in.)