toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Removal And Installation|Page 4220 > < Removal And Installation|Page 4218
Page 1
background image

Condenser Fan: Service and Repair
Disassembly And Reassembly

DISASSEMBLY

1. REMOVE FAN

Remove the clip and fan.

NOTE:  When removing the clip and fan, do not apply too much force to the motor shaft. And do not scratch the motor shaft.

2. REMOVE FAN MOTOR

a. Disconnect the lead wire from the fan shroud.

b. Remove the 3 screws and fan motor.

REASSEMBLY

1. INSTALL FAN MOTOR

Removal And Installation|Page 4220 > < Removal And Installation|Page 4218