Camry Solara SLEV6 V6-3.0L (1MZ-FE) (2000)
Seat Belt Tensioner: Testing and Inspection
Collision / Non-Collision Inspections
INSPECTION
1. PRETENSIONER IS NOT ACTIVATED
a. Perform a diagnostic system check.
b. Perform a visual check which includes the following items with the front seat outer belt removed from the vehicle.
-
Check for cuts and cracks in, or marked discoloration on the quarter trim panel.
-
Check for cuts and cracks in wire harness, and for chipping in connectors.
-
Check for deformation of the quarter panel.
CAUTION: For removal and installation of the front seat outer belt. Be sure to follow the correct procedure.
2. PRETENSIONER IS ACTIVATED
a. Perform a diagnostic system check.
b. Perform a visual check which includes the following items with the front seat outer belt removed from the vehicle.
-
Check for deformation of the quarter panel.
-
Check for damage on the connector and wire harness.