Camry Solara SLEV6 V6-3.0L (1MZ-FE) (2000)
/Page-1005007.png)
f.
To torque the pulley nut, turn SST (A) in the direction shown in the illustration.
Torque: 110.5 Nm (1,125 kg.cm, 81 ft.lb)
g. Remove the generator from SST (C).
h. Turn SST (B), and remove SST (A and B).
4. INSTALL RECTIFIER HOLDER
a. Place the seal plate on the rectifier end frame.
b. Install the 4 rubber insulators on the lead wires.
