Camry Solara SLEV6 V6-3.0L (1MZ-FE) (2000)
/Page-1118001.png)
Stabilizer Bar: Service and Repair
Rear
REMOVAL
1. REMOVE REAR WHEELS
2. REMOVE STABILIZER BAR LINKS
a. Remove the 2 nuts and stabilizer bar link.
HINT: If the ball joint turns together with the nut, use a hexagon (5 mm) wrench to hold the stud.
b. Employ the same manner described above to the other side.
3. REMOVE HEAT INSULATOR
Remove the 3 bolts, clip and heat insulator.
4. REMOVE STABILIZER BAR BRACKETS AND BUSHINGS
