Camry Wagon L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
/Page-447003.png)
10. Remove the bolt and No. 2 idler pulley
11. Remove crankshaft timing pulley. If the pulley cannot be removed by hand, use two screwdrivers.
NOTE: Position shop rags as shown to prevent damage.
12. Remove oil pump pulley using SST 09616-30011, remove the nut and pulley.
13. Remove oil pump.
a. Remove the twelve bolts.
b. Using a plastic-faced hammer, remove the oil pump by carefully tapping the oil pump body.
c. Remove the gasket.
